Lay out, cut, and place segmental paving units. Includes installers of bedding and restraining materials for the paving units.
- Paver Installer
- Paving Stone Installer
- Cutter
|
- Paver
- Paver Layer
- Segmental Wall Installer
|
No information available.
|
 5 of 12 displayed
- Cement the edges of the paved area.
- Compact bedding sand and pavers to finish the paved area, using a plate compactor.
- Cut paving stones to size and for edges, using a splitter and a masonry saw.
- Design paver installation layout pattern and create markings for directional references of joints and stringlines.
- Discuss the design with the client.
 All 12 displayed
- Cement the edges of the paved area.
- Compact bedding sand and pavers to finish the paved area, using a plate compactor.
- Cut paving stones to size and for edges, using a splitter and a masonry saw.
- Design paver installation layout pattern and create markings for directional references of joints and stringlines.
- Discuss the design with the client.
- Prepare base for installation by removing unstable or unsuitable materials, compacting and grading the soil, draining or stabilizing weak or saturated soils and taking measures to prevent water penetration and migration of bedding sand.
- Resurface an outside area with cobblestones, terracotta tiles, concrete or other materials.
- Screed sand level to an even thickness, and recheck sand exposed to elements, raking and rescreeding if necessary.
- Set pavers, aligning and spacing them correctly.
- Supply and place base materials, edge restraints, bedding sand and jointing sand.
- Sweep sand from the surface prior to opening to traffic.
- Sweep sand into the joints and compact pavement until the joints are full.
5 of 23 displayed
- adhere to safety procedures
- apply adhesives, caulking, sealants, or coatings
- apply grouting or other masonry adhesives
- build or repair masonry structures, including kilns or furnaces
- build or repair structures in construction, repair, or manufacturing setting
All 23 displayed
- adhere to safety procedures
- apply adhesives, caulking, sealants, or coatings
- apply grouting or other masonry adhesives
- build or repair masonry structures, including kilns or furnaces
- build or repair structures in construction, repair, or manufacturing setting
- cut or shape stone, tile, brick, or related material
- fabricate, assemble, or disassemble manufactured products by hand
- finish concrete surfaces
- grade or redistribute earth for roads or other construction
- lay or install brick, block, stone, tile, or related masonry material
- lay out masonry work
- measure tile or masonry materials
- move or fit heavy objects
- obtain information from clients, customers, or patients
- operate power construction equipment
- perform safety inspections in construction or resource extraction setting
- prepare site or surfaces for concrete or masonry work
- read tape measure
- repair cracks, defects, or damage in installed building materials
- understand construction specifications
- use concrete fabrication techniques
- use hand or power tools
- use measuring devices in construction or extraction work
No information available.
No information available.
No information available.
|
